BRAKE DISCS THAT BRING
ROBUST BRAKE CONTROL FOR FORTUNER VRZ
PERFORMANCE THROUGH INNOVATION
- Reduced wear and minimised judder and noise thanks to an optimised brake disc designed to have extremely low tolerances for potential user-induced defaults.
- Pillar Venting Technology (offset pillar): This innovative technology allows a better and more uniformed thermal dispersion. It prevents deformation and vibration, boosts performance and increases the service life of the disc and pad to give greater value for money.
- Consistent braking and durability as a result of excellent metallurgy and design
- High vibration damping helps eliminate brake noise and uneven pad wear
- Outstanding heat dissipation means no thermal deformation
- Non-directional surface finish for quicker and smoother bedding, and shorter stopping distances
- Quality assured. Discs feature permanent edge marking for total traceability, even under the heaviest wear conditions
FAQs
MAINTENANCE TIPS
FAQs
Do I have to replace all my brake parts when replacing my brake rotors?
No, you may not have to, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Do I have to replace my brake rotors after a certain amount of time?
No, you may not have to, but while it is a good idea to inspect your brake rotors at each tire rotation.
MAINTENANCE TIPS
The following inspections and maintenance procedures can help prevent potential brake problems:
- Check brake fluid level at every oil change. Replace fluid according to owner’s manual recommendations.
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- Check the thickness of your brake pads.
The following should be conducted by a qualified technician:
- Inspection of the brake hoses for brittleness or cracking.
- Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- Inspection of wheel bearings and grease seals.
- Parking brake adjustments (as needed).